Aluminum replacements for the 3 stock particle board trunk covers that are almost always missing in these cars.

• Engineered and manufactured in house in the USA!
• CNC laser cut from 0.063″ (1.5mm) aluminum, finished with an even brushed finish
• Ready to be painted, powder coated, wrapped, or can be left raw to match your interior/build
• Uses all factory mounting locations so there is no drilling, cutting, or modifying your car
• Installation instructions are included. No hardware is necessary as the pieces nestle into the stock styrofoam trunk molding.

If you have any questions please contact us! 

 Notes:

• These replace the stock trunk covers that nestle into the styrofoam trunk molding and attach to the carpet via adhesive. With the spare tire in place, they are very sturdy and will prevent your carpet from sinking into the voids of the trunk. Spray adhesive or similar can be used to attach these aluminum pieces to your stock carpet.
• These panels were designed around a BK1 (2009-2012). We have not tested them on a BK2, so if your vehicle is the later model please contact us prior to ordering.

PLEASE NOTE: Every product is custom made to order, not a product sitting on a shelf. As such, each order takes some processing time (usually 3 weeks) to produce, package and ship. If there are any questions we have on your design (most of the time there isn’t, but we do get some combinations that are tough to see), we will send an email to you about your order.