LED Underglow Installation

To install your LED Underglow Kit you will need the included kit found to the right, 3M tape, extra wiring to connect the power wire to car battery. 

There’s not too much to this kit, you’ll need to clean the mounting points thoroughly before placing 3M mounting tape. For the wires, I unscrewed my fender wells to run the wires. At first I ziptied the wires through my control arms but eventually that frayed the front wire. So I recommend the wheel wells.

For the power supply, you’need to connect the red power wire to your positive terminal and the black wire to a bare metal surface or the negative battery terminal to ground. 

For the Bluetooth App, there is a QR code to download the App, or simply go to your app store and search “LEDble“. It’s a pretty basic straightforward app. 

App connectivity tips: I’ve found that the app stays connected pretty well until you walk away from the car. Once you come back it doesn’t seem to work, you’ll need to close the app and reopen it. Kind of a pain in the ass but this is what I’ve found to work so far. 

Spinnywhoosh Underglow LEDs install

These instructions are a work in progress and I will update as needed. If you have came across anything you think would be beneficial to this write-up, please feel free to contact me

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist