This is a CNC laser cut under tray for the NC Miata (’06-’15) made by LRB Speed. The tray is made of 0.080″ aluminum sheet metal with an even brushed finish and will stand up to all the road can throw at it! This...

As a huge FC (86-91 RX7) enthusiast, I wanted to make one of the cool and rare OEM features of the FC a reality for the NC Miata (’06-’15).  On the RX7, this item was found on only a handful of models, and successfully...

These are aluminum heel plates for your Nissan 370Z. Skillard's 370Z heel plates are CNC cut and formed, as well as having embossed holes for additional strength. They are sold as a pair and are available in a raw aluminum finish or with black powder coating. Heel...

This is a high quality custom rear diffuser for the Datsun 240Z, 260Z and 280Z. Skillard's S30 Rear Diffuser is CNC cut from lightweight aluminum, precision formed and TIG welded. It is designed to fit around the OEM fuel tank, but will likely work with...

Skillard's 370Z Aluminum Side Splitters (sometimes called side skirts, or side blades) are CNC cut and formed. Available in raw aluminum or black powder coating. Mounting hardware is included. One of the key features to our side splitters is the formed offset in their center. This...

This is a high quality custom rear diffuser for the Nissan 370Z that spans the full width of the car.  Skillard's 370Z Rear Diffuser is CNC cut from lightweight aluminum, precision formed and flush mount nuts come pre-installed for clean and easy installation. Mounting brackets and...

CNC cut aluminum NASCAR style rear spoiler for your early Z car. Skillard's spoiler is CNC cut from 1/8" aluminum and available in raw aluminum or powder coated black finish. Mounting hardware is included along with four (4) aluminum hinges and a pair of beautifully...

Skillard's Datsun 620 tailgate rear lip is CNC cut from 1/8" Aluminum and bent the length of the lip to make it extremely rigid. It measures 54.5" wide to fit the 620 tailgate, but certainly may fit other trucks. Mounting hardware is included. Take a look...

Skillard's Front Lip Splitters for Aftermarket Air Dams are CNC-cut from 1/8" thick aluminum and are designed to fit many of the common aftermarket 280ZX front air dams. For ZX owners who are retaining the factory lower valance, we offer our 280ZX Front Lip Splitter. A front...

Skillard's 280ZX Front Lip Splitter is CNC-cut from 1/8" thick aluminum and is available in raw aluminum or black powder coating. Our Front Lip Splitter is intended to work with the OEM metal air dam, and mounting hardware is included.  For ZX owners running an...

Skillard's all-aluminum front grill is CNC cut and TIG welded to leave you with a lightweight, strong and attractive front grill for your 280ZX. It is intended to be installed with our 280ZX Aluminum Front Bumper, and comes with the necessary mounting hardware.  Our 280ZX front grill...

Skillard's bumper for the 280ZX is all-aluminum and very lightweight. It also is pulled in dramatically compared with the OEM bumper, solving the common complaints about the looks of the OEM 280ZX bumper. Installation hardware is included as well as LED turn signals. When you...

Skillard's rear bumper for the 280ZX is all-aluminum and very lightweight. It also is pulled in dramatically compared with the OEM bumper, solving the common complaints about the looks of the OEM 280ZX bumper. Necessary mounting brackets & hardware are included. You will need to...

Skillard's high quality custom rear diffuser for the Datsun 280ZX is CNC cut from lightweight aluminum, precision formed, and TIG welded. Our S130 Rear Diffuser is designed to fit with the OEM fuel tank, but will likely work with a fuel cell depending on size...

Skillard's aluminum Hatch Visor for the S130 280ZX comes with mounting brackets and installation hardware. Available in raw aluminum or powder coated black. Designed for the 2-seater, not for the 280ZX 2+2. Please review the installation video below prior to installation. MAKE SURE TO CHECK...

Skillard's 280ZX Rear Window Louvers are CNC cut from .063" aluminum. The brackets will mount to the rear hatch with rivnuts (see our rivnut installation video, below) and then the louvers will bolt on with the provided stainless steel machine screws. Available in raw aluminum...

Improve the look and style of your Datsun 620! Skillard's 620 Front Lip is made from lightweight and durable .063" aluminum. It is designed to mount up to the OEM lower valance and comes with a series of aluminum mounting brackets to also mount it...

Skillard's 620 Inner Tailgate Panel is CNC cut from 1/16" lightweight aluminum. It comes as two pieces to significantly cut down on shipping costs. It comes with stainless steel mounting screws. After testing several 620's, we determined that the pre-existing holes in the 620 tailgate are not the...

Skillard's aluminum heel plates for your Datsun 620 are CNC cut and formed. We include embossed holes for additional strength. Our heel plates are a little different. They are attached by a hinge in the front and a quick-release latch in the rear. It makes cleaning...

Skillard's Datsun 620 Kick Panels are CNC-cut from lightweight durable aluminum. The factory kick plates are made of fiberboard, which are often damaged and disintegrating, so this is a great upgrade option. After testing several 620's we determined that the pre existing holes in the...